Geosat Low Noise Block Dual PLL Ku-Band (10.7-12.75)
- Input frequency 1 – 10.7 – 11.7 GHz
- Input frequency 2 – 11.7 – 12.75 GHz
- L.O (GHz), Switching – 9.75, 10.6
- Input waveguide flange – WR-75
- Power Supply – +12 to +24V DC
Description
- Input frequency 1 – 10.7 – 11.7 GHz
- Input frequency 2 – 11.7 – 12.75 GHz
- L.O (GHz), Switching – 9.75, 10.6
- Input waveguide flange – WR-75
- Power Supply – +12 to +24V DC
| Section | Item | Specification | |
| Band 1 | Input (GHz) | 10.7 – 11.7 | |
| Output (MHz) | 950 – 1950 | ||
| L.O (GHz), Switching | 9.75 @13 VDC / or 22KHz off | ||
| Band 2 | Input (GHz) | 11.7 – 12.75 | |
| Output (MHz) | 1100 – 2150 | ||
| L.O (GHz), Switching | 10.6 @18 VDC / or 22KHz on | ||
| Specifications | Noise figure (@+25℃) | 1.0 dB max. | |
| Input VSWR | 2.5 : 1 max. | ||
| Conversion gain | 60 dB typ. (55dB min, 65dB max) | ||
| Output VSWR | 2.5 : 1 max. | ||
| Gain flatness | 5 dBp-p max. | ||
| Gain ripple (@ 40MHz) | 1 dBp-p max | ||
| 1dB gain compression point | +5 dBm min. | ||
| Output impedance | 75, 50 ohms | ||
| Leakage (@ input port) | -45 dBm max. | ||
| L.O stability (over temp.) | +/- 25KHz max | ||
| Phase noise | -70 dBc/Hz (@1KHz) -80 dBc/Hz (@10KHz) -95 dBc/Hz (@100KHz) |
||
| Image rejection | 40 dBc min. | ||
| Power supply | +12 to +24V DC | ||
| Required current | 350 mA max. | ||
| Operating temperature | -40℃ to +60℃ | ||
| Storage temperature | -40℃ to +80℃ | ||
| Relative humidity | 0% to 95% RH | ||
| Input waveguide flange | WR- 75 | ||
| > | IF output connector | F-Type, N-Type female | |
| Weight | 400 g | ||
Reviews
There are no reviews yet.