RF-Design 1+1 redundant L-Band Amplifier

The HQR145C epresents a 1:1 redundant L-Band/extended L-Bnad line amplifier (950…2150MHz or 850 – 2700MHz) with variable gain adjustment in 1dB steps (0 – 40dB), slope equalization and various additional functionalities in a compact 1RU/19″ rack-mount design. The unit comes with two independent and 1:1 redundant operating amplifier boards together with an internal RF switch and 1:1 redundant power-supplies. The HQR145C ́s two high dynamic 1:1 redundant operating amplifier modules (hot-standby) each provide variable gain control 0…40dB so to achieve best performance within the network. The redundancy switching between the two amplifier modules is done nearly interruption free with a switchover time of <5ms. The unit features variable gain control (MGC/ AGC), slope-equalization, RF power monitoring, thresholdalarming, 2 front-panel monitoring ports and 1:1 redundant dual power-supply (hot-swappable). Additional features such as switchable LNB-supply and a 10 MHz reference signal port are optionally available. The HQR145C has a front-side LC-Display/keypads for local configuration. Front-side status LED ́s indicating amplifier and power-supply status. Remote control and configuration can be done via its rear-side Ethernet-Interface (WebGUI, SNMP). This line amplifier is perfectly suited for RF distribution infrastructures in Teleports, Satellite Earth Stations, as well as Broadcast- and Broadband facilities wherever accurate RF power, highest stability and availability is necessary.

1+1 redundant L-Band Amplifier, max. gain 40dB, incl. 2 amplifier modules HQA45MI, 50Ohm SMA(f), RF power monitoring, slope equalization, status LED´s, LCDisplay/ keypads, Ethernet-Interface (WebGUI, SNMP), 1:1 redundant power supply, 1RU/19″ rackmount.
HS-Code: 85437030
Dimension Net: each,
Weight Net: 4Kg each,
Packing: 1,00 x Box,
Dimension: 55x50x13cm each,
Gross Weight: 5Kg each,
Total-Weight: 5Kg,
ECCN: EAR99
Remark: Please see datasheet for other RF impedance &
connectors.