Sale!
DMM-2410EC-H 4路H.264 HD/SD、MPEG-2 SD Encoder  Transcoder编码器 转码器

DMM-2410EC-H 4路H.264 HD/SD、MPEG-2 SD Encoder  Transcoder编码器 转码器

Original price was: ¥18,000.00.Current price is: ¥9,800.00.

MM-2410EC 是高集成度的H.264高/标清，MPEG-2标清编/转码器，可支持4路分别独立实时编码或转码、传输流再复用的功能。输入接口支持HDMI、SDI、CVBS、IP和ASI，编码或转码后的码流可以复用输出，也可以通过IP 直通输出。

本编码器IP部分有三种工作模式：单路全双工工作模式，1路MPTS输入和1路MPTS输出（内置复用器，可对4路本地编、转码码流，1路ASI或IP输入的码流进行复用）；多路IP 输出模式，支持5路IP输出（4路本地编码码流，1路ASI码流或1路复用码流），5路码流分别直通输出；多路全双工模式，IP支持4路SPTS输入和4路SPTS+1路MPTS输出。

  • 编码完全符合国际264/AVC HP@L4.0&MPEG-2 MP@ML编码标准
  • 支持4 路HDMI、4路SDI或4路CVBS输入，每路分别独立编码，CVBS输入的仅支持标清编码
  • 支持转码格式：264转H.264，H.264转MPEG-2，MPEG-2转H.264、MPEG-2 转MPEG-2
  • 内置复用器，支持5路码流复用（4路本地编码码流，1路ASI输入的码流） 复用后通过IP和ASI输出
  • 支持5路IP输出（4路本地编码码流，1路ASI码流或1路复用码流） 输出码率可达400Mb/s；同时ASI可以输出复用后的码流
  • IP支持多路全双工，4路SPTS输入和4路SPTS+1路MPTS输出
  • IP单路全双工支持FEC （使用FEC时支持TRP协议）
  • 支持视频分辨率：1080i，720p，576i，480i
  • 最小视频编码码率300Kb/s
  • 支持同频分辨率调整，可放大和缩小（不需要等比例缩放，但是帧率必须相同）
  • 支持VBR和CBR两种码率控制方式
  • 音频编码支持：MPEG1 Layer II，MPEG2/4  AAC-LC/HE-AAC
  • 可通过SNMP 和HTTP WEB进行远程控制和监控；
  • 可安装在DMM-1100或DMM-210的19”机箱内（双备份电源）
Compare
Categories: ,

Description

DMM-2410EC-H DMM-2410EC 4路H.264 HD/SD、MPEG-2 SD Encoder  Transcoder 编码器 转码器

DMM-2410EC is a highly integrated H.264 high/standard definition and MPEG-2 standard definition encoding/transcoding device, capable of supporting 4 channels of independent real-time encoding or transcoding, as well as transport stream remultiplexing functions. The input interfaces support HDMI, SDI, CVBS, IP, and ASI. The encoded or transcoded streams can be remultiplexed for output or directly output via IP.

The IP section of this encoder has three operational modes: single-channel full-duplex mode, featuring 1 MPTS input and 1 MPTS output (with a built-in multiplexer capable of remultiplexing 4 local encoded/transcoded streams and 1 ASI or IP input stream); multi-channel IP output mode, supporting 5 IP outputs (4 local encoded streams and 1 ASI stream or 1 remultiplexed stream), with each of the 5 streams being directly output; and multi-channel full-duplex mode, supporting 4 SPTS inputs and 4 SPTS + 1 MPTS output via IP.

The encoding fully complies with international H.264/AVC HP@L4.0 & MPEG-2 MP@ML encoding standards.
It supports 4 channels of HDMI, 4 channels of SDI, or 4 channels of CVBS input, with each channel being independently encoded. CVBS input only supports standard definition encoding.
Supported transcoding formats include: H.264 to H.264, H.264 to MPEG-2, MPEG-2 to H.264, and MPEG-2 to MPEG-2.
A built-in multiplexer supports remultiplexing of 5 streams (4 local encoded streams and 1 ASI input stream), with the remultiplexed stream being output via IP and ASI.
It supports 5 IP outputs (4 local encoded streams and 1 ASI stream or 1 remultiplexed stream), with an output bitrate of up to 400Mb/s; ASI can also output the remultiplexed stream.
IP supports multi-channel full-duplex operation, with 4 SPTS inputs and 4 SPTS + 1 MPTS output.
IP single-channel full-duplex mode supports FEC (with TRP protocol support when FEC is used).
Supported video resolutions include: 1080i, 720p, 576i, 480i.
Minimum video encoding bitrate is 300Kb/s.
It supports same-frequency resolution adjustment, allowing for scaling up and down (non-proportional scaling is supported, but frame rate must remain the same).
It supports both VBR and CBR bitrate control methods.

Audio encoding supports: MPEG1 Layer II, MPEG2/4 AAC-LC/HE-AAC.
Remote control and monitoring can be performed via SNMP and HTTP WEB.
It can be installed in a 19″ chassis of DMM-1100 or DMM-210 (with redundant power supplies).

Reviews

There are no reviews yet.

Be the first to review “DMM-2410EC-H 4路H.264 HD/SD、MPEG-2 SD Encoder  Transcoder编码器 转码器”

Your email address will not be published. Required fields are marked *

Related products