Ku LNB 10.70-12.75 GHz WDL ULP Dual & Quattro

Description

Ku LNB 10.70-12.75 GHz WDL ULP Dual & Quattro

Description

With simultaneous reception of Low & High Ku-Band 10.70-12.75 GHz (model E) or 10.95-12.75 GHz (model B) you are ready for all demands.

It comes with Ultra Low Phase Noise is standard to meet the requirements for reception of DVB- S2X (professional profiles), N3 and N4 signals.

Can be ordered as a Single polarisation LNB or as a Quattro LNB for both Horisontal and Vertical polarisation including OMT and weather protection case.

 

Ultra Low Phase Noise (ULP) is recommended* for:

DVB-S2:   – Narrowband 8PSK 8/9 and 9/10 FEC

– 16 APSK or higher modulation type (any bandwidth)

– All applications with “Pilot Off”

DVB-S2X:   All “MODCODS” and symbol rates NS3/NS4:   All “MODCODS” and symbol rates

* Please note that these are general recommendations and that all other system components also will influence system perfor- mance.

 

 

LNB rear connectors

Connector A

Type: Female F, N or SMA

Function: Low band RF Output

 

Connector B

Type: Female F, N or SMA

Function: DC input, 10 MHz input, High band RF Output

 

 

®

 

S WEDISH  MICRO WA VE  A B

Technical specifications are typical, for specific part number specifications, please contact us. Specifications are subject to change without prior notice. Products from Swedish Microwave AB are made for commercial use.

Swedish Microwave AB | Dynamovagen 5 | S-591 61 Motala | Sweden | Contact: +46 141 21 61 35 | sales@smw.se | smw.se

 

 

Ku LNB 10.70-12.75 GHz WDL ULP Dual & Quattro

Technical specifications

 

Model                                 E                                                                                      B

|nput frequency                         10.70-12.75 GHz                                                                           10.95-12.75 GHz

LO                                            9.75 and 10.60 GHz                                                                       10.00 and 10.75 GHz

Low/High band                           10.70-11.70 / 11.70-12.75 GHz                                                        10.95-11.70 / 11.70-12.75 GHz

|nput WG                                   WR75 / R120

|nput flange                                PBR120 with M4 thread

|nput VSWR                                2.3:1 max.

|nput max power                       0 dBm instantaneous (not continuous)

DC input                                     +15 to 24 V (15 V min., 26 V max.)  via High band connector on Ext. 10 MHz. Ref models and one or both connectors on |nternal

Gain                                            60 dB typ., 55 dB min.                                                                   60 dB typ., 55 dB min.

 

MODEL with

MODEL with                              Sine Wave, Level -10 dBm to +10 dBm. Supplied through High band output connector. With no ext. 10 MHz ref. present LO shifts

External 10 MHz ref.                   -20 ppm.

Spuriouses Low/High band        -60dBm @ 1700 MHz / -70dBm @ 1700 MHz typ.                             -60dBm @ 1500 MHz / -70dBm @ 1500 MHz typ.

Out of band rejection                20 dB min.

Group Delay                             ±1 ns max.

|mage rejection                         40 dB typ.

Phase Noise                                 -35 dBc @ 10 Hz     -65 dBc @ 100 Hz     -82 dBc @ 1 kHz    -94 dBc @ 10 kHz     -98 dBc @ 100 kHz    -120 dBc @  >1MHz, typ.

 

Noise figure @ 23°C	0.8 dB / 59 K typ.
Output frequency	Low band  950-1950MHz, High band 1100-2150 MHz	Low band  950-1700MHz, High band 950-2000 MHz

Output P1dB                               +15 dBm min.

Output |P3                                 +25 dBm min.

Output VSWR                          1.7:1 typ.

Output Connectors                   F female 75Ω , N female 50Ω or SMA female 50Ω

Dimensions                               122 x 57 x 46 mm (F and SMA), 128 x 57 x 46 mm (N)

Weight                                      335 g (F and SMA), 371 g (N)

Temperature range                      Storage and operating: -40 to +80ºC, -40 to +176° F

MTBF as per M|L-HDBK-217F Notice 2: Environmental Condition GF (Ground Fixed): >245000 hours, MTBF                                          Environmental Condition A|C (Airborne, |nhabited, Cargo): >122000 hours,

Quality level: Commercial, Temp used for MTBF calculation: +35 C Ambient Miscellaneous                               Enclosed conductive O-ring, mounting screws, M4x10,4 pcs

Low gain option (48 to 54 dB for larger antennas

Quattro LNB including OMT and weather protection

DC and 10 MHz input at Low band output connector

 

QUATTRO

Cross polarisation |nput Waveguide Dimensions Weight

31.5 dB min. C-120 (circular 18 mm) 205 x 152 x 83 mm 1162 g (F-connectors),  1231 g (N-connectors)

 

 

Ku LNB 10.70-12.75 GHz WDL ULP Dual & Quattro

Technical Drawing

 

 

QUATTRO weather case

 

Professional Satcom Frequency Converters & Components. All products are fully CE and RoHS complient and every unit includes full documentation of performance tests and

quality control. Please contact sales@smw.se to configure or customize the unit to your needs. Visit smw.se or scan QR code to see our full product range and request a quote.

 

 

®

S WEDISH  MICRO WA VE  A B

Technical specifications are typical, for specific part number specifications, please contact us. Specifications are subject to change without prior notice. Products from Swedish Microwave AB are made for commercial use.

Swedish Microwave AB | Dynamovagen 5 | S-591 61 Motala | Sweden | Contact: +46 141 21 6