Agilis ALB1292C7-80E-3 ALB129 Series Compact 80W Ext. Ku-Band Block-Up Converter
¥381,567.00
This small and lightweight BUC is ideal for mobile and satellite uplink applications. The BUC has “Best in Class” efficiency and “lowest power consumption.” The unit works on a wide range AC power supply of 96VAC to 2…
Description
This small and lightweight BUC is ideal for mobile and satellite uplink applications. The BUC has “Best in Class” efficiency and “lowest power consumption.” The unit works on a wide range AC power supply of 96VAC to 264VAC. Innovative and efficient thermal design makes this BUC one of the smallest, robust, reliable and rugged enough to withstand outdoor conditions in the industry. Built-in redundancy feature eliminates the use of an external controller for 1:1 redundancy operation. This
eliminates messy cabling at the antenna making this a very elegant solution. Extensive M/C interface with RS232/RS485/Ethernet (SNMP & HTTP), Bluetooth and Wifi.
Features
• Compact and lightweight
• Available in standard and extended Ku-Band
• Forward & reverse power detection
• Input power detection
• Intuitive monitoring & control through RS232/RS485 & Ethernet (SNMP & HTTP), Bluetooth and Wifi.
• Automatic fault identification & alarm generation
• Temperature compensation facility
• Built-in redundancy facility
• Built-in 10MHz reference with auto-detection
• Built-in receive reject filter
• Sample port for output monitoring
• Wide operating temperature range -40ºC to +60ºC
• RoHS Compliant
• Waterproof
Quality Assurance
100% of all BUCs go through stringent quality checks in addition to well defined Electrical Stress Screening to ensure operation in harsh outdoor environments. The BUCs are also subjected to seal test for water ingress verification.
Reliability
Field proven under harsh environment conditions, Agilis ODUs can withstand temperature ranging from -40ºC to +60ºC with up to 100% humidity
| RF Specifications | |
| Transmit Frequency | 13.75GHz – 14.5GHz |
| IF Frequency Range | 950MHz – 1700MHz |
| LO Frequency | 12.80GHz |
| Output Power (P1dB) | |
| 80W | 49dBm |
| 100W | 50dBm |
| Spectral Re-growth | 30dBc @ 2dB below rated power (P1dB) at 1.0 x symbol rate offset for QOQPSK or QPSK |
| Third Order Intermod (two tone) | -25dBc @ 7dB below 2MHz apart at P1dB |
| Small Signal Gain | 70dB Min |
| 80W / 100W | 70dB Min |
| Gain Flatness Full Band | ±2dB |
| Gain Slope over 40MHz | ±1dB |
| Gain Variation over temperature | ±2dB @ from -40°C to +60°C |
| Gain Control | 20dB in step of 0.5dB |
| O/P spurious | According to EN301428 |
| Phase Noise @ Offset | |
| 1KHz 10KHz 100KHz |
-73dBc/Hz -83dBc/Hz -93dBc/Hz |
| I/P VSWR | 1.3:1 |
| O/P VSWR | 1.25:1 |
| Noise Power Density Tx BD | 70dBm/4KHz |
| Rx BD | 142dBm/4KHz |
| DC Power | |
| Prime Power | 230VAC (range 96V to 264VAC) |
| Power Consumption 80W / 100W | 550VA Typical |
| Interfaces | |
| IF Input Interface | 50Ohms N-type Female |
| Output Interface | WR 75G |
| External Reference | |
| Frequency | 10MHz |
| Power | -5dBm to +5dBm |
| Internal reference | Built-in (Auto detection) |
| External Reference Phase Noise Requirement @ frequency offset | |
| 1KHz 10KHz 100KHz |
-150dBc/Hz -155dBc/Hz -160dBc/Hz |
| Monitor and Control | |
| Monitor | BUC temperature, Status alarm, Output power, Reverse power, Input power, LED status indication |
| Control | Attenuation, RF output mute |
| Interface | RS232/RS485 & Ethernet (SNMP & HTTP), Bluetooth / WIFI (Optional) |
| Tx Redundancy | Built-in |
| Environmental | |
| Operating Temperature | -40°C to +60°C |
| Humidity | Up to 100%, Weather protection sealed to IP65 |
| Mechanical | |
| Size 80W / 100W | 360L x 200W x 145H mm |
| Weight 80W / 100W | 9.5kg |
| Color | White Powder Coat |
Datasheets / 技术资料下载
Additional information
| Weight | 9.5 kg |
|---|---|
| Dimensions | 20 × 36 × 14.5 cm |
| Brand | Agilis |
| Model | ALB1292C7-80E-3 |
| Series | ALB 129 Series |
| Frequency Band | Ku-Band |
| Transmit Frequency | 13.75GHz – 14.5GHz |
| IF Frequency | 950MHz – 1700MHz |
| LO Frequency | 12.80GHz |
| Small Signal Gain | 70dB min |
| Gain Flatness | ±2dB |
| Gain Variation | ±1dB; ±2dB @ from -40°C to +60°C |
| Gain Control | 20dB in step of 0.5dB |
| Intermodulation | 30dBc @ 2dB below rated power (P1dB) at 1.0 x symbol rate offset for QOQPSK or QPSK; -25dBc @ 7dB below 2MHz apart at P1dB |
| Spurious | According to EN301428 |
| VSWR | 1.3:1; 1.25:1 |
| Noise Power Density | 70dBm/4KHz; 142dBm/4KHz |
| Prime Power | 230VAC (range 96V to 264VAC) |
| Power Consumption | 550VA Typical |
| IF Input Interface | 1.3:1; 50Ohms N-type Female |
| RF Output Interface | According to EN301428; 1.25:1; WR 75G |
| Reference | 10MHz; -5dBm to +5dBm; Built-in (Auto detection) |
| Monitor | BUC Temperature, Input power, LED status indication, Output power, Reverse power, Status alarm |
| Control | Attenuation, RF output mute |
| Communication Port | Bluetooth / WIFI (Optional), RS232/RS485 & Ethernet (SNMP & HTTP) |
| Redundancy | Built-In |
| Operating Temperature | -40°C to +60°C |
| Humidity | Up to 100%, Weather protection sealed to IP65 |
| Dimensions | 360L x 200W x 145H mm |
| Weight | 9.50 kg |
| Colour | White Powder Coat |
| Output Power |
Reviews
There are no reviews yet.